Bedrooms,
beautifully considered.

Deep cream textured high headboard, broad upholstered base and soft curved corners. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify an engineered hardwood/plywood bed base with HR foam upholstery, stain-resistant fabric/bouclé and rounded edges, matching the indicated headboard proportion. 180×200 cm is a comparator size only; dimensions remain unconfirmed.

Supply in transportable sections; secure tall headboard to approved wall backing, avoid exposed connections and coordinate side-table clearances and electrical switch access.

Confirm room and mattress setting-out, final headboard width/height, frame weight, foam and fabric certifications, module access, fire performance, warranty and bedding sizes.

Vacuum with fabric nozzle, use only approved upholstery cleaner and protect low-profile base from wet mopping and abrasion.

White bedding outlines thick mattress above the pale upholstered base. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Expansive white duvet and pillows draped across king-sized bed. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose woven, tufted or hand-knotted low-shed rug suitable for residential traffic with material blend and pile comparable to the image; select anti-slip underlay if required.

Loose lay with flat edges; confirm rug proportions and door swing clearance, place suitable underlay for the floor material and avoid trapped moisture.

Verify actual room setting-out, custom rug size, pile height, backing, colour, binding, off-gassing and cleaning protocol before purchase.

Vacuum regularly without overly aggressive brush; rotate for even sun exposure, clean stains promptly and follow professional cleaning recommendations.

Two-tone textured blanket over the foot of the duvet. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose woven, tufted or hand-knotted low-shed rug suitable for residential traffic with material blend and pile comparable to the image; select anti-slip underlay if required.

Loose lay with flat edges; confirm rug proportions and door swing clearance, place suitable underlay for the floor material and avoid trapped moisture.

Verify actual room setting-out, custom rug size, pile height, backing, colour, binding, off-gassing and cleaning protocol before purchase.

Vacuum regularly without overly aggressive brush; rotate for even sun exposure, clean stains promptly and follow professional cleaning recommendations.

Dark burgundy accent cushion set over white bed pillows. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Select final loose accessories from physically approved retail products or commissioned styling packages, matching perceived scale, colour and texture without claiming exact brand identification.

Loose place after final clean and fit-out handover; provide non-marking pads under vases and trays, secure tall plants or fragile items where necessary.

Confirm selected SKU, actual material, dimensions, quantities, indoor/outdoor suitability, fragility and supplier return policy.

Dust with microfiber; use object-specific cleaning for glass, ceramic or metallic finish; avoid prolonged moisture on polished timber and stone.

Low dark bedside cabinet topped in light stone-effect surface. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Rounded burgundy padded bench against the foot of the bed. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Deep warm terracotta lounge chair in the window corner. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Slim dark round coffee or side table beside the armchair. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Long floating-look charcoal low cabinet beneath the wall display. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Large dark rectangular television fixed to right media feature wall. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify manufacturer-approved equipment of appropriate size and system type; rendered shape is illustrative only. Ensure power, ventilation, data and safety performance match the final selected equipment.

Provide structurally verified proprietary mounting and accessible service zones; integrate AV, safety clearances, heat rejection and power isolation without obstructing maintenance.

Confirm exact model number, dimensions, certifications, mounting hardware, dedicated power, ventilation, warranty, service access and compliance with current project approvals.

Operate, clean and maintain strictly to manufacturer instructions; isolate electrical systems before service and use authorized service providers.

Wide deep brown veneer panels across the left and right walls. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

Pale large veined slab inset between dark timber bands. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose matching honed, polished or satin stone / large-format porcelain only after physical slab or mock-up approval. Define the confirmed source, thickness, surface treatment, backing, veins and edge profiles.

Use engineered stone anchors, thin-set adhesive or specialist frame as appropriate. Prepare numbered slab cutting maps and edge mitres with access and safe movement allowances.

Confirm natural stone versus porcelain, slab lot, actual sizes, sealers, substrate structural capacity, water sensitivity, book-matching direction, radii and edge profile.

Use pH-neutral cleaner, promptly wipe spills, avoid acids and abrasives, re-seal porous natural stones per supplier recommendation and inspect edges.

Veined stone-looking high backdrop around the TV screen. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose matching honed, polished or satin stone / large-format porcelain only after physical slab or mock-up approval. Define the confirmed source, thickness, surface treatment, backing, veins and edge profiles.

Use engineered stone anchors, thin-set adhesive or specialist frame as appropriate. Prepare numbered slab cutting maps and edge mitres with access and safe movement allowances.

Confirm natural stone versus porcelain, slab lot, actual sizes, sealers, substrate structural capacity, water sensitivity, book-matching direction, radii and edge profile.

Use pH-neutral cleaner, promptly wipe spills, avoid acids and abrasives, re-seal porous natural stones per supplier recommendation and inspect edges.

Intricate illuminated branch-and-petal chandelier hanging in the middle of ceiling. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specialist engineered floral/cherry-blossom-style lighting in translucent glass/resin and anodised or plated branch metal; propose 2700–3000 K, CRI ≥90 with manufacturer lighting tests.

Engineering-approved ceiling steelwork and independent safety anchors; secure each suspension and decorative petal, provide certified control gear and concealed service route.

Obtain dimensions, total mass, load calculation, canopy detail, LED wattage/CRI/CCT, dimmer compatibility, component replacements, and supplier maintenance manual.

Access by safe elevated platform; clean glass/resin petals individually with lint-free cloth, inspect connections and preserve spare LED components.

Long slender warm-white tube pendant adjacent to bed headboard. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Proposed certified suspended slender tube or glass-shade pendant with metal canopy, diffused warm LED nominal 2700–3000 K, final CRI and wattage subject to product cut sheet.

Fix canopy to slab/approved reinforcement with drop length coordinated to bed height, head clearance and bedside furniture; conceal wiring safely.

Confirm whether fixture is one pendant or complete group, suspension drop, power, mounting and dimmer, finish matching and fire-rating of adjacent finishes.

Dust shade and stem; isolate power before replacement and maintain safe suspension fixings.

Continuous slender amber-white vertical illumination beside stone inset. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Proposed 24 V constant-voltage high-density LED tape in sized anodized-aluminium thermal profile and opal diffuser, nominal 8–15 W/m, 2700–3000 K, CRI ≥90; IP class to application.

Route low-voltage cable within accessible detail, use compatible dimmable constant-voltage driver and calculated voltage drop; separate driver ventilation/access from insulation. Align diffuser flush with adjacent finishes.

Confirm tape SKU, actual linear run, channel width, driver output/power reserve, heat sink, control protocol, glare shielding, access, local electrical approval and whether quoted LED set includes all parts.

Use clean dry microfiber on diffuser; maintain accessible drivers, inspect for flicker/hot spots, replace matched LED section by approved electrician.

Long linear black ceiling track with small adjustable heads. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Proposed slim black track luminaire in suitable surface/recessed magnetic or proprietary system; specify 2700–3000 K adjustable spots, CRI ≥90 and control gear after selection.

Accurately set straight black track and joint detail to reflected ceiling plan; coordinate ceiling suspension, cable feeds, access and thermal clearances.

Confirm system voltage, fixtures-per-track, driver location, recessed or surface installation, optics, circuiting and whether quoted unit is whole track or spotlight.

Clean fixtures and dust track, re-aim optics after room completion, isolate circuits before any module change.

Discrete small dark trim spot set flush into the main ceiling. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify a purpose-made recessed/trimless LED downlight with aluminium housing, 2700–3000 K, target CRI ≥90, appropriate UGR and selected optical beam angle. Nominal 7–12 W only as design-development allowance.

Confirm ceiling cavity, approved cutout, proprietary spring retention or plaster-in trim, heat clearance and driver access; connect through certified electrician and required rated barriers.

Manufacturer photometry/IES, actual wattage, beam angle, cutout diameter, trim, dimming, IP/fire rating, ceiling void and electrical loads are not established by 3D rendering.

Clean lens as approved, provide accessible replaceable driver and isolate supply before all maintenance.

Integrated narrow warm accent in the open right display shelving. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Proposed 24 V constant-voltage high-density LED tape in sized anodized-aluminium thermal profile and opal diffuser, nominal 8–15 W/m, 2700–3000 K, CRI ≥90; IP class to application.

Route low-voltage cable within accessible detail, use compatible dimmable constant-voltage driver and calculated voltage drop; separate driver ventilation/access from insulation. Align diffuser flush with adjacent finishes.

Confirm tape SKU, actual linear run, channel width, driver output/power reserve, heat sink, control protocol, glare shielding, access, local electrical approval and whether quoted LED set includes all parts.

Use clean dry microfiber on diffuser; maintain accessible drivers, inspect for flicker/hot spots, replace matched LED section by approved electrician.

Floor-length light white sheer covering the patio glazing. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify approved semi-sheer, lined or blackout textile from sample in the observed hue with UV stability, required fullness, compatible track or roller mechanism and optional fire rating.

Fit concealed ceiling track or measured roller support to approved lintel/reinforcement, coordinate pocket depth, curtain stack, electrical supply and return edges.

Confirm finished opening width and height, fabric composition, pleat ratio, wash/shrinkage data, light transmission, track load, motor if any and curtain stack back.

Vacuum drapes, follow textile care labels, avoid damp storage and maintain track rollers or motor systems periodically.

Dense taupe curtains flanking terrace-facing glazing. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify approved semi-sheer, lined or blackout textile from sample in the observed hue with UV stability, required fullness, compatible track or roller mechanism and optional fire rating.

Fit concealed ceiling track or measured roller support to approved lintel/reinforcement, coordinate pocket depth, curtain stack, electrical supply and return edges.

Confirm finished opening width and height, fabric composition, pleat ratio, wash/shrinkage data, light transmission, track load, motor if any and curtain stack back.

Vacuum drapes, follow textile care labels, avoid damp storage and maintain track rollers or motor systems periodically.

Broad cream soft-pile rug sitting beneath the upholstered bed. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose woven, tufted or hand-knotted low-shed rug suitable for residential traffic with material blend and pile comparable to the image; select anti-slip underlay if required.

Loose lay with flat edges; confirm rug proportions and door swing clearance, place suitable underlay for the floor material and avoid trapped moisture.

Verify actual room setting-out, custom rug size, pile height, backing, colour, binding, off-gassing and cleaning protocol before purchase.

Vacuum regularly without overly aggressive brush; rotate for even sun exposure, clean stains promptly and follow professional cleaning recommendations.

Medium-dark linear wood planks framing the area rug. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose approved porcelain stone-look tile or engineered timber as appropriate, with tested slip resistance, wear properties and colour/surface variation controlled by sample approval.

Install over a suitably prepared, flat and dry substrate; use material-compatible adhesive, expansion joints, perimeter margins and manufacturer-recommended grout/bedding.

Confirm substrate moisture, movement joints, tile batch / timber species, exact unit size, slip class, underlay, leveling tolerances and transition details.

Sweep and damp-clean with suitable non-abrasive products; protect furniture contact points and observe specific stone or timber cleaning restrictions.

Slim dark door and window framing opening towards a landscaped terrace. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify project-compliant glazing, approved laminated/tempered safety glass, engineered metal profiles and applicable thermal/solar performance according to building and jurisdiction requirements.

Installation by approved specialist from surveyed dimensions with properly designed structural restraints, sealants, thermal movement and maintainable perimeter details.

Confirm wind load, glazing build-up, U-value/SHGC, acoustic level, safety impact rating, mullion dimensions, tint and building approvals.

Clean with neutral glass cleaner and soft cloth, inspect seals and channels, and avoid hard scraping that damages coatings.

Naturalistic multi-branch potted tree next to the window drape. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Select final loose accessories from physically approved retail products or commissioned styling packages, matching perceived scale, colour and texture without claiming exact brand identification.

Loose place after final clean and fit-out handover; provide non-marking pads under vases and trays, secure tall plants or fragile items where necessary.

Confirm selected SKU, actual material, dimensions, quantities, indoor/outdoor suitability, fragility and supplier return policy.

Dust with microfiber; use object-specific cleaning for glass, ceramic or metallic finish; avoid prolonged moisture on polished timber and stone.

Narrow framed shelf display with concealed light. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

Warm metallic decorative bowl standing on TV cabinet. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Select final loose accessories from physically approved retail products or commissioned styling packages, matching perceived scale, colour and texture without claiming exact brand identification.

Loose place after final clean and fit-out handover; provide non-marking pads under vases and trays, secure tall plants or fragile items where necessary.

Confirm selected SKU, actual material, dimensions, quantities, indoor/outdoor suitability, fragility and supplier return policy.

Dust with microfiber; use object-specific cleaning for glass, ceramic or metallic finish; avoid prolonged moisture on polished timber and stone.

Low king-sized platform bed with generously padded ivory/cream shell. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify an engineered hardwood/plywood bed base with HR foam upholstery, stain-resistant fabric/bouclé and rounded edges, matching the indicated headboard proportion. 180×200 cm is a comparator size only; dimensions remain unconfirmed.

Supply in transportable sections; secure tall headboard to approved wall backing, avoid exposed connections and coordinate side-table clearances and electrical switch access.

Confirm room and mattress setting-out, final headboard width/height, frame weight, foam and fabric certifications, module access, fire performance, warranty and bedding sizes.

Vacuum with fabric nozzle, use only approved upholstery cleaner and protect low-profile base from wet mopping and abrasion.

Large mattress defined by full white bedding surface. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Layered white quilt pillows and shallow cream cushions. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose woven, tufted or hand-knotted low-shed rug suitable for residential traffic with material blend and pile comparable to the image; select anti-slip underlay if required.

Loose lay with flat edges; confirm rug proportions and door swing clearance, place suitable underlay for the floor material and avoid trapped moisture.

Verify actual room setting-out, custom rug size, pile height, backing, colour, binding, off-gassing and cleaning protocol before purchase.

Vacuum regularly without overly aggressive brush; rotate for even sun exposure, clean stains promptly and follow professional cleaning recommendations.

Warm brown woven throw draped from lower bed over cover. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose woven, tufted or hand-knotted low-shed rug suitable for residential traffic with material blend and pile comparable to the image; select anti-slip underlay if required.

Loose lay with flat edges; confirm rug proportions and door swing clearance, place suitable underlay for the floor material and avoid trapped moisture.

Verify actual room setting-out, custom rug size, pile height, backing, colour, binding, off-gassing and cleaning protocol before purchase.

Vacuum regularly without overly aggressive brush; rotate for even sun exposure, clean stains promptly and follow professional cleaning recommendations.

Rust-toned soft accent cushion among cream bedding. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Select final loose accessories from physically approved retail products or commissioned styling packages, matching perceived scale, colour and texture without claiming exact brand identification.

Loose place after final clean and fit-out handover; provide non-marking pads under vases and trays, secure tall plants or fragile items where necessary.

Confirm selected SKU, actual material, dimensions, quantities, indoor/outdoor suitability, fragility and supplier return policy.

Dust with microfiber; use object-specific cleaning for glass, ceramic or metallic finish; avoid prolonged moisture on polished timber and stone.

Small circular champagne bedside table at left edge. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Small opal stacked spherical bedside table light. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Select an approved ceramic/glass bedside decorative lamp with opaque neutral shade and LED retrofit globe at 2700–3000 K, subject to product datasheet.

Ensure stable tabletop placement and a safe supply cable route; no concealed wiring is assumed from render.

Confirm supplier luminaire size, shade type, plug, power, dimming and warranty.

Dry dust and clean ceramic as approved; remove power before maintenance.

Slender hanging wall-side warm luminaire in a clear cylindrical enclosure. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Proposed certified suspended slender tube or glass-shade pendant with metal canopy, diffused warm LED nominal 2700–3000 K, final CRI and wattage subject to product cut sheet.

Fix canopy to slab/approved reinforcement with drop length coordinated to bed height, head clearance and bedside furniture; conceal wiring safely.

Confirm whether fixture is one pendant or complete group, suspension drop, power, mounting and dimmer, finish matching and fire-rating of adjacent finishes.

Dust shade and stem; isolate power before replacement and maintain safe suspension fixings.

Suspended bookmatched white-and-gold marble-look rectangular partition. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose matching honed, polished or satin stone / large-format porcelain only after physical slab or mock-up approval. Define the confirmed source, thickness, surface treatment, backing, veins and edge profiles.

Use engineered stone anchors, thin-set adhesive or specialist frame as appropriate. Prepare numbered slab cutting maps and edge mitres with access and safe movement allowances.

Confirm natural stone versus porcelain, slab lot, actual sizes, sealers, substrate structural capacity, water sensitivity, book-matching direction, radii and edge profile.

Use pH-neutral cleaner, promptly wipe spills, avoid acids and abrasives, re-seal porous natural stones per supplier recommendation and inspect edges.

Thin continuous line of exposed-looking flames beneath floating panel. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify manufacturer-approved equipment of appropriate size and system type; rendered shape is illustrative only. Ensure power, ventilation, data and safety performance match the final selected equipment.

Provide structurally verified proprietary mounting and accessible service zones; integrate AV, safety clearances, heat rejection and power isolation without obstructing maintenance.

Confirm exact model number, dimensions, certifications, mounting hardware, dedicated power, ventilation, warranty, service access and compliance with current project approvals.

Operate, clean and maintain strictly to manufacturer instructions; isolate electrical systems before service and use authorized service providers.

Large warm timber low plinth supporting linear fire and stone divider. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

Big dark TV centrally set into floating veined stone screen. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify manufacturer-approved equipment of appropriate size and system type; rendered shape is illustrative only. Ensure power, ventilation, data and safety performance match the final selected equipment.

Provide structurally verified proprietary mounting and accessible service zones; integrate AV, safety clearances, heat rejection and power isolation without obstructing maintenance.

Confirm exact model number, dimensions, certifications, mounting hardware, dedicated power, ventilation, warranty, service access and compliance with current project approvals.

Operate, clean and maintain strictly to manufacturer instructions; isolate electrical systems before service and use authorized service providers.

Four floating illuminated stone-look horizontal beams above screen. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose approved sculpted gypsum / GRG, routed plaster, decorative hand-finished panel or specialist commissioned artwork as suitable to the exact design, with tested substrate and final texture/colour sample.

Independent framing or backing engineered to feature weight, mechanical anchorage and concealed service access. Full-size prototype required for complex relief, lighting pockets and tight-radius modules.

Confirm licensed artwork if relevant, material composition, fire-performance evidence, dimensional set-out, weight, lighting coordination, fixing engineer approval and approved 1:1 mock-up.

Dust low-pressure with a soft brush and avoid high-pressure washing; repair chips with approved compatible material; preserve access to fixture anchors.

Wide intersecting warm-lit gold circular loops above central stone. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose engineered gold-tone aluminium LED ring fixtures with diffused light, tunable or fixed 2700–3000 K, CRI 90+ target, dimmable remote driver subject to luminaire approval.

Structural engineer to design ceiling support plates and multiple suspension stems; provide segregated accessible drivers, certified earthing, dimming control and adequate headroom.

Confirm ring diameters, overall weight, lumen output, driver wattage, dimming protocol, support centre lines, cable entries and installed height.

Isolate electrical supply; clean metal with dry soft cloth; provide access for LED driver replacement and inspection of hanger connections.

Warm horizontal LED lines along the lower edge of stone-look beams. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Proposed 24 V constant-voltage high-density LED tape in sized anodized-aluminium thermal profile and opal diffuser, nominal 8–15 W/m, 2700–3000 K, CRI ≥90; IP class to application.

Route low-voltage cable within accessible detail, use compatible dimmable constant-voltage driver and calculated voltage drop; separate driver ventilation/access from insulation. Align diffuser flush with adjacent finishes.

Confirm tape SKU, actual linear run, channel width, driver output/power reserve, heat sink, control protocol, glare shielding, access, local electrical approval and whether quoted LED set includes all parts.

Use clean dry microfiber on diffuser; maintain accessible drivers, inspect for flicker/hot spots, replace matched LED section by approved electrician.

Long narrow black surface-ceiling track luminaire with adjustable heads. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Proposed slim black track luminaire in suitable surface/recessed magnetic or proprietary system; specify 2700–3000 K adjustable spots, CRI ≥90 and control gear after selection.

Accurately set straight black track and joint detail to reflected ceiling plan; coordinate ceiling suspension, cable feeds, access and thermal clearances.

Confirm system voltage, fixtures-per-track, driver location, recessed or surface installation, optics, circuiting and whether quoted unit is whole track or spotlight.

Clean fixtures and dust track, re-aim optics after room completion, isolate circuits before any module change.

Small black cylindrical or recessed ceiling accent points. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify a purpose-made recessed/trimless LED downlight with aluminium housing, 2700–3000 K, target CRI ≥90, appropriate UGR and selected optical beam angle. Nominal 7–12 W only as design-development allowance.

Confirm ceiling cavity, approved cutout, proprietary spring retention or plaster-in trim, heat clearance and driver access; connect through certified electrician and required rated barriers.

Manufacturer photometry/IES, actual wattage, beam angle, cutout diameter, trim, dimming, IP/fire rating, ceiling void and electrical loads are not established by 3D rendering.

Clean lens as approved, provide accessible replaceable driver and isolate supply before all maintenance.

Full-height light timber vertical wall fields and display recesses. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

Warm linear light recessed under narrow right side display shelves. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Proposed 24 V constant-voltage high-density LED tape in sized anodized-aluminium thermal profile and opal diffuser, nominal 8–15 W/m, 2700–3000 K, CRI ≥90; IP class to application.

Route low-voltage cable within accessible detail, use compatible dimmable constant-voltage driver and calculated voltage drop; separate driver ventilation/access from insulation. Align diffuser flush with adjacent finishes.

Confirm tape SKU, actual linear run, channel width, driver output/power reserve, heat sink, control protocol, glare shielding, access, local electrical approval and whether quoted LED set includes all parts.

Use clean dry microfiber on diffuser; maintain accessible drivers, inspect for flicker/hot spots, replace matched LED section by approved electrician.

Soft tall sheer white drapes in front of floor-to-ceiling garden glass. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify approved semi-sheer, lined or blackout textile from sample in the observed hue with UV stability, required fullness, compatible track or roller mechanism and optional fire rating.

Fit concealed ceiling track or measured roller support to approved lintel/reinforcement, coordinate pocket depth, curtain stack, electrical supply and return edges.

Confirm finished opening width and height, fabric composition, pleat ratio, wash/shrinkage data, light transmission, track load, motor if any and curtain stack back.

Vacuum drapes, follow textile care labels, avoid damp storage and maintain track rollers or motor systems periodically.

Muted brown drape panels alongside daylight glazed wall. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify approved semi-sheer, lined or blackout textile from sample in the observed hue with UV stability, required fullness, compatible track or roller mechanism and optional fire rating.

Fit concealed ceiling track or measured roller support to approved lintel/reinforcement, coordinate pocket depth, curtain stack, electrical supply and return edges.

Confirm finished opening width and height, fabric composition, pleat ratio, wash/shrinkage data, light transmission, track load, motor if any and curtain stack back.

Vacuum drapes, follow textile care labels, avoid damp storage and maintain track rollers or motor systems periodically.

Large soft organic-shape pale rug grounding the bed. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose woven, tufted or hand-knotted low-shed rug suitable for residential traffic with material blend and pile comparable to the image; select anti-slip underlay if required.

Loose lay with flat edges; confirm rug proportions and door swing clearance, place suitable underlay for the floor material and avoid trapped moisture.

Verify actual room setting-out, custom rug size, pile height, backing, colour, binding, off-gassing and cleaning protocol before purchase.

Vacuum regularly without overly aggressive brush; rotate for even sun exposure, clean stains promptly and follow professional cleaning recommendations.

Pale-to-medium herringbone patterned floor around bed. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose approved porcelain stone-look tile or engineered timber as appropriate, with tested slip resistance, wear properties and colour/surface variation controlled by sample approval.

Install over a suitably prepared, flat and dry substrate; use material-compatible adhesive, expansion joints, perimeter margins and manufacturer-recommended grout/bedding.

Confirm substrate moisture, movement joints, tile batch / timber species, exact unit size, slip class, underlay, leveling tolerances and transition details.

Sweep and damp-clean with suitable non-abrasive products; protect furniture contact points and observe specific stone or timber cleaning restrictions.

Large glazed opening on left leading to the planted terrace. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify project-compliant glazing, approved laminated/tempered safety glass, engineered metal profiles and applicable thermal/solar performance according to building and jurisdiction requirements.

Installation by approved specialist from surveyed dimensions with properly designed structural restraints, sealants, thermal movement and maintainable perimeter details.

Confirm wind load, glazing build-up, U-value/SHGC, acoustic level, safety impact rating, mullion dimensions, tint and building approvals.

Clean with neutral glass cleaner and soft cloth, inspect seals and channels, and avoid hard scraping that damages coatings.

Open wood-toned dressing space with lit shelves and hanging garments. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose full-height MR MDF/birch-ply carcasses with engineered timber or lacquer door panels, soft-close hardware, UV-stable finish, veneer grain matching, and integrated track/LED only where depicted.

Measure every wall after finishes; shop-draw internal shelving, hanging positions, hinge/track arrangement, anchoring, ventilation and fire-rated backing where required.

Verify run length, actual door sizes, ceiling tolerance, materials, hinges, door opening, interior modules, furniture loads, electrical isolation and authority/building requirements.

Clean only with damp non-abrasive cloth, maintain hinge adjustments and prevent moisture at cabinet edges.

Narrow metallic vertical detail supporting floating stone-like screen. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify sample-approved bronze/champagne PVD stainless steel or durable coated aluminium/steel according to detail, with consistent brushed or satin sheen and tested compatibility with adjacent stone.

Workshop fabricate returns, sleeves and concealed clips; protect all edges, control galvanic interaction and avoid exposed mechanical fasteners where possible.

Confirm metal grade, exact profile, surface finish, coating durability, fixing system, edge radii, thermal movement and sample consistency.

Use a soft damp microfiber cloth, immediately dry finger marks, and avoid abrasive pastes or acidic cleaners that dull brushed coatings.

Curvaceous ivory lounge sofa with brown cushions on front side of divider. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Smooth greyish reflective irregular stone-top low table with sculptural gold spheres. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Round pale upholstered pouf in the lounge zone. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Warm timber continuous desk beneath window at right side. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

Low curved accent upholstered writing chair next to desk. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Low-contrast warm cream oval rug beneath the curved sofa. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose woven, tufted or hand-knotted low-shed rug suitable for residential traffic with material blend and pile comparable to the image; select anti-slip underlay if required.

Loose lay with flat edges; confirm rug proportions and door swing clearance, place suitable underlay for the floor material and avoid trapped moisture.

Verify actual room setting-out, custom rug size, pile height, backing, colour, binding, off-gassing and cleaning protocol before purchase.

Vacuum regularly without overly aggressive brush; rotate for even sun exposure, clean stains promptly and follow professional cleaning recommendations.

Slim timber and ivory lit recesses with built-in shelving near left. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

Indoor planter with soft olive foliage at far left. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Select final loose accessories from physically approved retail products or commissioned styling packages, matching perceived scale, colour and texture without claiming exact brand identification.

Loose place after final clean and fit-out handover; provide non-marking pads under vases and trays, secure tall plants or fragile items where necessary.

Confirm selected SKU, actual material, dimensions, quantities, indoor/outdoor suitability, fragility and supplier return policy.

Dust with microfiber; use object-specific cleaning for glass, ceramic or metallic finish; avoid prolonged moisture on polished timber and stone.

Large cream bed with contrasting dark striped high upholstered headboard. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify an engineered hardwood/plywood bed base with HR foam upholstery, stain-resistant fabric/bouclé and rounded edges, matching the indicated headboard proportion. 180×200 cm is a comparator size only; dimensions remain unconfirmed.

Supply in transportable sections; secure tall headboard to approved wall backing, avoid exposed connections and coordinate side-table clearances and electrical switch access.

Confirm room and mattress setting-out, final headboard width/height, frame weight, foam and fabric certifications, module access, fire performance, warranty and bedding sizes.

Vacuum with fabric nozzle, use only approved upholstery cleaner and protect low-profile base from wet mopping and abrasion.

Bold thick upholstered charcoal and cream channel headboard with arched top. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose approved sculpted gypsum / GRG, routed plaster, decorative hand-finished panel or specialist commissioned artwork as suitable to the exact design, with tested substrate and final texture/colour sample.

Independent framing or backing engineered to feature weight, mechanical anchorage and concealed service access. Full-size prototype required for complex relief, lighting pockets and tight-radius modules.

Confirm licensed artwork if relevant, material composition, fire-performance evidence, dimensional set-out, weight, lighting coordination, fixing engineer approval and approved 1:1 mock-up.

Dust low-pressure with a soft brush and avoid high-pressure washing; repair chips with approved compatible material; preserve access to fixture anchors.

Large pale cream padded mattress visibly dressed in bedding. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

White quilted bedding and neat pillow layers. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose woven, tufted or hand-knotted low-shed rug suitable for residential traffic with material blend and pile comparable to the image; select anti-slip underlay if required.

Loose lay with flat edges; confirm rug proportions and door swing clearance, place suitable underlay for the floor material and avoid trapped moisture.

Verify actual room setting-out, custom rug size, pile height, backing, colour, binding, off-gassing and cleaning protocol before purchase.

Vacuum regularly without overly aggressive brush; rotate for even sun exposure, clean stains promptly and follow professional cleaning recommendations.

Rich burgundy knitted throw across the lower bed. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose woven, tufted or hand-knotted low-shed rug suitable for residential traffic with material blend and pile comparable to the image; select anti-slip underlay if required.

Loose lay with flat edges; confirm rug proportions and door swing clearance, place suitable underlay for the floor material and avoid trapped moisture.

Verify actual room setting-out, custom rug size, pile height, backing, colour, binding, off-gassing and cleaning protocol before purchase.

Vacuum regularly without overly aggressive brush; rotate for even sun exposure, clean stains promptly and follow professional cleaning recommendations.

Small burgundy accent pillow amid cream bed pillows. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Select final loose accessories from physically approved retail products or commissioned styling packages, matching perceived scale, colour and texture without claiming exact brand identification.

Loose place after final clean and fit-out handover; provide non-marking pads under vases and trays, secure tall plants or fragile items where necessary.

Confirm selected SKU, actual material, dimensions, quantities, indoor/outdoor suitability, fragility and supplier return policy.

Dust with microfiber; use object-specific cleaning for glass, ceramic or metallic finish; avoid prolonged moisture on polished timber and stone.

Rounded deep burgundy velvet bench opposite bed headboard. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Oversized rounded ivory lounge seat in front foreground. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Plump spherical ivory ottoman centered before lounge furniture. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Warm golden timber field panel surrounding TV and decorative walls. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

Saturated vertical dark-green timber slats behind bed and feature wall. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

White slim wall-mounted two-drawer floating TV shelf to the left. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

Black wall display showing a smart home interface. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify manufacturer-approved equipment of appropriate size and system type; rendered shape is illustrative only. Ensure power, ventilation, data and safety performance match the final selected equipment.

Provide structurally verified proprietary mounting and accessible service zones; integrate AV, safety clearances, heat rejection and power isolation without obstructing maintenance.

Confirm exact model number, dimensions, certifications, mounting hardware, dedicated power, ventilation, warranty, service access and compliance with current project approvals.

Operate, clean and maintain strictly to manufacturer instructions; isolate electrical systems before service and use authorized service providers.

Irregular ivory picture frame around dark artistic luminous picture. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose approved sculpted gypsum / GRG, routed plaster, decorative hand-finished panel or specialist commissioned artwork as suitable to the exact design, with tested substrate and final texture/colour sample.

Independent framing or backing engineered to feature weight, mechanical anchorage and concealed service access. Full-size prototype required for complex relief, lighting pockets and tight-radius modules.

Confirm licensed artwork if relevant, material composition, fire-performance evidence, dimensional set-out, weight, lighting coordination, fixing engineer approval and approved 1:1 mock-up.

Dust low-pressure with a soft brush and avoid high-pressure washing; repair chips with approved compatible material; preserve access to fixture anchors.

Large soft pale flower-petal pendant lamp descending at ceiling centre. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specialist engineered floral/cherry-blossom-style lighting in translucent glass/resin and anodised or plated branch metal; propose 2700–3000 K, CRI ≥90 with manufacturer lighting tests.

Engineering-approved ceiling steelwork and independent safety anchors; secure each suspension and decorative petal, provide certified control gear and concealed service route.

Obtain dimensions, total mass, load calculation, canopy detail, LED wattage/CRI/CCT, dimmer compatibility, component replacements, and supplier maintenance manual.

Access by safe elevated platform; clean glass/resin petals individually with lint-free cloth, inspect connections and preserve spare LED components.

Continuous narrow light at edge of recessed warm cream ceiling. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Proposed 24 V constant-voltage high-density LED tape in sized anodized-aluminium thermal profile and opal diffuser, nominal 8–15 W/m, 2700–3000 K, CRI ≥90; IP class to application.

Route low-voltage cable within accessible detail, use compatible dimmable constant-voltage driver and calculated voltage drop; separate driver ventilation/access from insulation. Align diffuser flush with adjacent finishes.

Confirm tape SKU, actual linear run, channel width, driver output/power reserve, heat sink, control protocol, glare shielding, access, local electrical approval and whether quoted LED set includes all parts.

Use clean dry microfiber on diffuser; maintain accessible drivers, inspect for flicker/hot spots, replace matched LED section by approved electrician.

Small bright spot fixtures set into ceiling perimeter. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify a purpose-made recessed/trimless LED downlight with aluminium housing, 2700–3000 K, target CRI ≥90, appropriate UGR and selected optical beam angle. Nominal 7–12 W only as design-development allowance.

Confirm ceiling cavity, approved cutout, proprietary spring retention or plaster-in trim, heat clearance and driver access; connect through certified electrician and required rated barriers.

Manufacturer photometry/IES, actual wattage, beam angle, cutout diameter, trim, dimming, IP/fire rating, ceiling void and electrical loads are not established by 3D rendering.

Clean lens as approved, provide accessible replaceable driver and isolate supply before all maintenance.

Warm pleated shade lamp on small ivory bedside table. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Select brass-finish freestanding lamp with opaque textile shade and approved low-glare warm 2700–3000 K LED globe; electrical plug and certification to UAE requirements.

Loose FF&E placed on approved side table, allow routed power without loose extension leads and protect top from scratching and heat.

Confirm actual table height, lamp size, dimmer/switch type, plug, shade fire safety and replacement lamp specification.

Remove dust from textile shade with soft brush; dry-clean brass-looking base gently and avoid fluid near electrical components.

Pale round two-tier nightstand beneath pleated lamp. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Muted brown drape pulled to side of garden-facing glazing. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify approved semi-sheer, lined or blackout textile from sample in the observed hue with UV stability, required fullness, compatible track or roller mechanism and optional fire rating.

Fit concealed ceiling track or measured roller support to approved lintel/reinforcement, coordinate pocket depth, curtain stack, electrical supply and return edges.

Confirm finished opening width and height, fabric composition, pleat ratio, wash/shrinkage data, light transmission, track load, motor if any and curtain stack back.

Vacuum drapes, follow textile care labels, avoid damp storage and maintain track rollers or motor systems periodically.

Translucent vertical white curtain layer across sliding door. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify approved semi-sheer, lined or blackout textile from sample in the observed hue with UV stability, required fullness, compatible track or roller mechanism and optional fire rating.

Fit concealed ceiling track or measured roller support to approved lintel/reinforcement, coordinate pocket depth, curtain stack, electrical supply and return edges.

Confirm finished opening width and height, fabric composition, pleat ratio, wash/shrinkage data, light transmission, track load, motor if any and curtain stack back.

Vacuum drapes, follow textile care labels, avoid damp storage and maintain track rollers or motor systems periodically.

Large black-framed sliding balcony door between green leaves. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify project-compliant glazing, approved laminated/tempered safety glass, engineered metal profiles and applicable thermal/solar performance according to building and jurisdiction requirements.

Installation by approved specialist from surveyed dimensions with properly designed structural restraints, sealants, thermal movement and maintainable perimeter details.

Confirm wind load, glazing build-up, U-value/SHGC, acoustic level, safety impact rating, mullion dimensions, tint and building approvals.

Clean with neutral glass cleaner and soft cloth, inspect seals and channels, and avoid hard scraping that damages coatings.

Soft pale oak laid in long planks in daylight zone. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose approved porcelain stone-look tile or engineered timber as appropriate, with tested slip resistance, wear properties and colour/surface variation controlled by sample approval.

Install over a suitably prepared, flat and dry substrate; use material-compatible adhesive, expansion joints, perimeter margins and manufacturer-recommended grout/bedding.

Confirm substrate moisture, movement joints, tile batch / timber species, exact unit size, slip class, underlay, leveling tolerances and transition details.

Sweep and damp-clean with suitable non-abrasive products; protect furniture contact points and observe specific stone or timber cleaning restrictions.

Soft ivory patterned pile rug under bed. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose woven, tufted or hand-knotted low-shed rug suitable for residential traffic with material blend and pile comparable to the image; select anti-slip underlay if required.

Loose lay with flat edges; confirm rug proportions and door swing clearance, place suitable underlay for the floor material and avoid trapped moisture.

Verify actual room setting-out, custom rug size, pile height, backing, colour, binding, off-gassing and cleaning protocol before purchase.

Vacuum regularly without overly aggressive brush; rotate for even sun exposure, clean stains promptly and follow professional cleaning recommendations.

Small neutral white vase with dried foliage on television cabinet. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Select final loose accessories from physically approved retail products or commissioned styling packages, matching perceived scale, colour and texture without claiming exact brand identification.

Loose place after final clean and fit-out handover; provide non-marking pads under vases and trays, secure tall plants or fragile items where necessary.

Confirm selected SKU, actual material, dimensions, quantities, indoor/outdoor suitability, fragility and supplier return policy.

Dust with microfiber; use object-specific cleaning for glass, ceramic or metallic finish; avoid prolonged moisture on polished timber and stone.

Flush medium warm wood door on right side of room. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

Pair of oversized pale curvy lounge armchairs seen in alternate view. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify hardwood or engineered frame, kiln-dried where applicable, high-resilience foam, contract-grade performance-tested upholstery in the closest approved color. Seat depth, foam density, joinery and dimensions to shop-drawing approval.

Loose FF&E item: verify lift access, finished dimensions, modules, clearance to wall and floor protection. Do not fix to the building unless approved and documented.

Confirm final upholstery sample, foam firmness, fire-performance compliance where applicable, module sizes, number of seats, supplier warranty, delivery access and setting-out.

Vacuum upholstery with appropriate attachment; professional fabric-cleaning by care code, test stain removal discreetly, protect from sun fading and use non-marking feet.

Tall honey-toned full height timber wall fields in secondary view. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Propose responsibly sourced veneered MR MDF / birch plywood or approved equivalent as appropriate; 18–25 mm core nominal subject to span, natural or dyed veneer, matte two-pack polyurethane finish and coordinated concealed edges.

Fabricate from approved site-survey drawings, set controlled shadow gaps, concealed battens/cleats and access panels; sample grain matching. Accommodate electrical, wall reinforcement and tolerance allowances.

Verify true site dimensions and squareness, fire rating, veneer sample, edge banding, fixing load, expansion gaps, substrate moisture, MEP conduit positions and mock-up.

Clean with soft dry or lightly damp cloth, avoid standing water, direct heat and abrasive chemicals; maintain environmental humidity and inspect finish joints.

Warm tiny integrated point light within art at rear wall. This description is drawn from the original render; precise dimensions, composition and manufacturer cannot be confirmed from imagery.

Specify a decorative wall sconce with plated-brass look, diffused glass/shade, 2700–3000 K LED and controlled glare, with final certification subject to maker.

Supply concealed back-box, fixing reinforcement, compliant electrical earth and accessible junction and driver where applicable. Check fixing against padded wall modules.

Confirm switch location, mounting height, projection, body finish, dimming, wall substrate and the exact luminaire model before ordering.

Isolate supply, clean plated surfaces without abrasives and replace lamps/driver per manufacturer guidance.